Bulk Asbestos (NIOSH 9002)

Our laboratory provides accurate bulk asbestos analysis using the NIOSH 9002 method, in compliance with WorkSafeBC. This service identifies and quantifies asbestos fibers in bulk building materials through Phase Contrast Microscopy (PCM).

Whether for renovation, demolition, or routine inspections. Our reliable results support informed decision-making and safe environmental practices.

*Please contact for pricing.

    1. Check the Asbestos Containing Material (ACM) section to determine if the material is a possible risk.

    2. Download the Chain of Custody (CoC), linked above.

    3. Fill out the CoC, making sure to fill in any box not labeled “Lab Use'“.

    4. Place the suspect material into a clear plastic bag, ziplock works well.

    5. Place the CoC, along with the bagged suspect material into a second bag (Double layering the suspect material)

    6. Drop off the sample at our lab located in the about us section.

    Pricing varies depending on turn around time and quantity, please contact us for more information.

    If you have any questions regarding the process please contact us and we will be happy to help.

  • Any building constructed before 2019 may contain asbestos. Common ACM’s include but are not limited to:

    • Drywall Joint Compound (Mud)

    • Texture Coat (Popcorn Ceiling)

    • Vinyl Flooring (Linoleum)

    • Plaster

    • Grout/Mortar

    • Ceiling Tiles

    • Mastic

    If you have any questions or concerns regarding if a material is a potential ACM, please contact us.

  • Our Lab Technicians will analyze the potential ACMs using approved methods to determine, as little as 0.5% Asbestos content, type of Asbestos, and which layer of the material it is contained in.

    If your results returned positive and are unsure where to go from here, give us a call and we will help you make an informed decision on your next steps.